pitha
06-11 12:46 PM
somebody please close this thread
wallpaper Luna Sea
qualified_trash
11-15 01:27 PM
you have a expired I-94 and a h1B which is valid
How can you have an expired I94 and valid H1B? It is technically not possible.
When your H1B expires when you are in the US and you apply for an extension of the H1B along with an extension of the stay of the person(s) since they now hold this status, you get a I797 where the right bottom part is your NEW I94. You are supposed to staple this to the old I94 in your passport and surrender the same when you fly out of the country to a non contiguous territory
That is how you were able to travel!!!!!!!
As for Automatic revalidation here is the link to the State Dept site:
http://travel.state.gov/visa/laws/telegrams/telegrams_1441.html
How can you have an expired I94 and valid H1B? It is technically not possible.
When your H1B expires when you are in the US and you apply for an extension of the H1B along with an extension of the stay of the person(s) since they now hold this status, you get a I797 where the right bottom part is your NEW I94. You are supposed to staple this to the old I94 in your passport and surrender the same when you fly out of the country to a non contiguous territory
That is how you were able to travel!!!!!!!
As for Automatic revalidation here is the link to the State Dept site:
http://travel.state.gov/visa/laws/telegrams/telegrams_1441.html
ExoVoid
06-13 05:21 AM
CONFUSED: what is up with those percentages, my count is just a bit above 100...
I get approx 600%
I get approx 600%
2011 Wallpaper Rating:
wandmaker
11-05 09:10 PM
You dont need to pay the fees, as it is USCIS mistake - Send the new application form with a cover letter, you can send it yourself.
Now my Lawyer is advising me to include the old fees and a new application with a letter stating motion to refile seeking correction. He is insisting on us to send the fees ($350) again. Any suggestions? Can I send it directly to INS?
Now my Lawyer is advising me to include the old fees and a new application with a letter stating motion to refile seeking correction. He is insisting on us to send the fees ($350) again. Any suggestions? Can I send it directly to INS?
more...
gc_wannabe
06-16 11:05 PM
Hi- When I started off with the green card process, I had not idea about what most of the things meant. I joined a very reputable Fortune 500 company in 2006 (the same year I came to the US on a H1B), and started my GC process in 2007. The company offered me an pre-approved labor with a 2006 PD, which had a matching requirement w.r.t job description and salary.
During July 2007, i filed for my I-140 and I-485. Subsequently, my I-140 got approved without any issues. Now, given that my priority date is close to being current (2/14/2006), I'm afraid if using a pre-approved labor will have any role to play with my I-485 approval.
And no, I'm not working for a consultant. And I have been with the same employer since 2006.
Please don't start off with the jumping the queue argument. When I used the labor substitution, it was perfectly legal, and didn't even know what a priority date is :-)
Thanks.
During July 2007, i filed for my I-140 and I-485. Subsequently, my I-140 got approved without any issues. Now, given that my priority date is close to being current (2/14/2006), I'm afraid if using a pre-approved labor will have any role to play with my I-485 approval.
And no, I'm not working for a consultant. And I have been with the same employer since 2006.
Please don't start off with the jumping the queue argument. When I used the labor substitution, it was perfectly legal, and didn't even know what a priority date is :-)
Thanks.
pcjandyala
07-22 10:14 PM
Shana,
Once you take the infopass appointment, you can go to your local office (indicated on the appointment) and wait in the line/queue and ask your questions them when they call your number.
It's simple process.
Thanks
Once you take the infopass appointment, you can go to your local office (indicated on the appointment) and wait in the line/queue and ask your questions them when they call your number.
It's simple process.
Thanks
more...
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
2010 Luna Park and Bridge, Sydney
kevinkris
04-21 01:53 PM
Hi greeta,
I am not sure about time frame for GC but FREEDOM is more important for me. The market is not good, if you loose the job in L1 then you have to leave
to your home country and cannot transfer your visa. If it's H1 you can always do that.
If at all there is a difference in processing times for GC for L1, i don't see any drastic difference. Instead of 6 years it may be 5 years (6 years for GC? Are you kidding me?). No big deal.
Good luck.
Rgds,
Kris
Hi,
I am working in US on L1 and my company would start my green card filling in next few months.
I also have valid H1B pettion stamped and can switch to H1B which would mean that I can work freely here at US.
But many of my friends told me that green card processing is faster on L1.
I am not able to make decision whether I should continue working on L1 or change my status to H1 to get better hike and more opportunity.
Pls can anyone tell me which would be wise choice. Is green card processing for L1 visa is faster?
Thanks in advance.
~Greeta
I am not sure about time frame for GC but FREEDOM is more important for me. The market is not good, if you loose the job in L1 then you have to leave
to your home country and cannot transfer your visa. If it's H1 you can always do that.
If at all there is a difference in processing times for GC for L1, i don't see any drastic difference. Instead of 6 years it may be 5 years (6 years for GC? Are you kidding me?). No big deal.
Good luck.
Rgds,
Kris
Hi,
I am working in US on L1 and my company would start my green card filling in next few months.
I also have valid H1B pettion stamped and can switch to H1B which would mean that I can work freely here at US.
But many of my friends told me that green card processing is faster on L1.
I am not able to make decision whether I should continue working on L1 or change my status to H1 to get better hike and more opportunity.
Pls can anyone tell me which would be wise choice. Is green card processing for L1 visa is faster?
Thanks in advance.
~Greeta
more...
eagerr2i
08-04 03:45 PM
If you have worked for 40 quarters, you will be eligible for Soc Security irrespective of where you live. There are american citizens settled in the Carrebean Islands who get their social security checks there. However, the big question is "What if the social security runs of out of money when your time comes", Soc Security Admin will start having negative cash flows starting from 2008 beacuse of the baby boomers retiring in great nunbers and fewer younger people joining the work force in comparison. Or there might be the case that the payouts get reduced from the maximun of $ 1800 presently to a token payment of just $ 300..!
401 K money is yours and you can do what ever you like. You could with draw it in 3-4 installments over as many years, thus reducing the taxable income for the year- provided you can earn higher ROI on that money by investing in stock market of the country you plan to return to as compared to being vested in the US stock market. You may also keep in mind that currency exchange and strengthening/devalaution of the dollar against your home currency will also have an affect on ROI based on when you with draw. That affect is almost impossible to predict for any one.
Many people leave the money here in USA, so that they could use it for their kids when the kids return to USA for their higher education. What you want to do with 401K is entirely your call..
401 K money is yours and you can do what ever you like. You could with draw it in 3-4 installments over as many years, thus reducing the taxable income for the year- provided you can earn higher ROI on that money by investing in stock market of the country you plan to return to as compared to being vested in the US stock market. You may also keep in mind that currency exchange and strengthening/devalaution of the dollar against your home currency will also have an affect on ROI based on when you with draw. That affect is almost impossible to predict for any one.
Many people leave the money here in USA, so that they could use it for their kids when the kids return to USA for their higher education. What you want to do with 401K is entirely your call..
hair wallpapers zedge. ringtones
immi2006
11-06 10:03 AM
What is new in your post ? It was like that for a few weekes now.
I see that for EB2 the PD is 01 APR 2004 now. I want to know if I-485 approvals is linked to this PD date or they will work independent to these days.
Thanks,
Sury
-------------------------------
PD : Feb'07
I-140 - Pending
I-131 - Approved
I-485 - Pending
Center: TEXAS SERVICE CENTER
Recieved EAD Card and FP done.
-------------------------------
I see that for EB2 the PD is 01 APR 2004 now. I want to know if I-485 approvals is linked to this PD date or they will work independent to these days.
Thanks,
Sury
-------------------------------
PD : Feb'07
I-140 - Pending
I-131 - Approved
I-485 - Pending
Center: TEXAS SERVICE CENTER
Recieved EAD Card and FP done.
-------------------------------
more...
chi_shark
07-07 11:00 AM
as i experienced, almost all attorneys will ask you to file ac21. some attorneys charge as much as $1000 each time you change jobs... its ka-ching for them...
as for not wasting time when pd is currrent... i absolve you of that crime :-) jk... but IMHO you really cannot influence the outcome of this process by being quick on your part except ensuring continuation of the process...
as for the original question: you need not have to convince anyone about EAD... as someone else pointed out, the first page of the I-9 form states clearly that its illegal to discriminate based on immigration status... if you are in IT, there are umpteen examples of what you are trying to do (yours truly included)... just play it easy... best of luck...
with the lack of regulation on AC 21 law, each attorney's take different position when it comes to handling AC 21 cases, in my case the primary reason driven to file AC 21 is the small window of period available in getting I 485 adjudicated when the PD is current, so I don't want to loose time when the PD is current and get an RFE from USCIS and running back and forth to get the RFE responded before loosing PD, more over I took the 20 minute counselling with Murthy law firm and they advised to notify USCIS about employer change.Later I was fortunate that USCIS did not issue RFE(may be it helped USCIS by notifying them in advance and clear their doubt) and approve my I 485 when PD was current.
Cheers
Kris
as for not wasting time when pd is currrent... i absolve you of that crime :-) jk... but IMHO you really cannot influence the outcome of this process by being quick on your part except ensuring continuation of the process...
as for the original question: you need not have to convince anyone about EAD... as someone else pointed out, the first page of the I-9 form states clearly that its illegal to discriminate based on immigration status... if you are in IT, there are umpteen examples of what you are trying to do (yours truly included)... just play it easy... best of luck...
with the lack of regulation on AC 21 law, each attorney's take different position when it comes to handling AC 21 cases, in my case the primary reason driven to file AC 21 is the small window of period available in getting I 485 adjudicated when the PD is current, so I don't want to loose time when the PD is current and get an RFE from USCIS and running back and forth to get the RFE responded before loosing PD, more over I took the 20 minute counselling with Murthy law firm and they advised to notify USCIS about employer change.Later I was fortunate that USCIS did not issue RFE(may be it helped USCIS by notifying them in advance and clear their doubt) and approve my I 485 when PD was current.
Cheers
Kris
hot Rose wallpaper by ~
sw33t
05-07 12:25 AM
The Civil Rights Division's Coordination and Review Section can handle individual complaints alleging discrimination on the basis of race, color, national origin, sex, and religion by State and local law enforcement agencies that receive financial assistance from the Department of Justice.
http://www.usdoj.gov/crt/cor/index.php
Most major city police departments receive grants from the DOJ.
Here is the Dept. of Justice website giving more information -
http://www.usdoj.gov/crt/split/complaints.php#Police
Don't try going to the department directly or filing a form directly. Not recommended as they will not be friendly.
Also contact your local community organization leaders and let them know about the incident.
It might be a good idea to setup a protocol or a process in place in the event something like this happens again. Memorize a contact number and educate your family members on what to do.
Here is more information on your rights if you are detained or arrested -
http://www.msba.org/departments/commpubl/publications/brochures/legalrights.htm
The above link is a compilation by the Maryland Bar Association but it is pretty close to what you can do and what you can't.
File a complaint over here - http://www.policeabuse.com/index.php?option=com_performs&formid=44 if you live in a small town/city. Its Free.
BTW, this is a very popular technique to evict a neighbor who is not wanted around. :) But then again, I might be speculating about your living situation.
I hope you did not commit an act of domestic violence.
http://www.usdoj.gov/crt/cor/index.php
Most major city police departments receive grants from the DOJ.
Here is the Dept. of Justice website giving more information -
http://www.usdoj.gov/crt/split/complaints.php#Police
Don't try going to the department directly or filing a form directly. Not recommended as they will not be friendly.
Also contact your local community organization leaders and let them know about the incident.
It might be a good idea to setup a protocol or a process in place in the event something like this happens again. Memorize a contact number and educate your family members on what to do.
Here is more information on your rights if you are detained or arrested -
http://www.msba.org/departments/commpubl/publications/brochures/legalrights.htm
The above link is a compilation by the Maryland Bar Association but it is pretty close to what you can do and what you can't.
File a complaint over here - http://www.policeabuse.com/index.php?option=com_performs&formid=44 if you live in a small town/city. Its Free.
BTW, this is a very popular technique to evict a neighbor who is not wanted around. :) But then again, I might be speculating about your living situation.
I hope you did not commit an act of domestic violence.
more...
house Sailor Moon Wallpaper
vegi_hyd@yahoo.com
06-07 09:55 AM
I would (and did) send to the address on the confirmation page. If you search for other forums on EAD filing recently, that is what is also recommended there
Thanks JackisBack.
Thanks JackisBack.
tattoo Valle de Luna Moonvalley San
Rakson
03-01 12:25 PM
Another front to think about :
Recently I have heard that when the company publishes advertisement for the labor when filling for fresh PERM, every time there is a response coming back because of the higher rate of unemployment in the market. The issue is, if any response comes back then the company cannot proceed with the labor and new GC process gets hung.
So, to be on safer side just check on ur skill set before resigning the current job as it should not be readily available in the market.
You have added important point for consideration. Thanks!
Recently I have heard that when the company publishes advertisement for the labor when filling for fresh PERM, every time there is a response coming back because of the higher rate of unemployment in the market. The issue is, if any response comes back then the company cannot proceed with the labor and new GC process gets hung.
So, to be on safer side just check on ur skill set before resigning the current job as it should not be readily available in the market.
You have added important point for consideration. Thanks!
more...
pictures Anime Art Wallpaper
eastindia
01-06 09:44 AM
I understand that this bill many not pass or even move any forward. I thought two senior senators from both parties showing interest in this topic is a great opportunity for IV to present our case in a different light. We have been clamoring about the difficulties we are facing because of the present delay in green card processing. Unfortunately this is only our problem and no one else really has to be bothered about it. If we present our case in a mutually beneficial point of view perhaps some of the politicians will have little more interest in our situation. Remember JFK’s famous words…”Ask not what the country can do for you….” If we write to Senators Kerry and Lugar now, even if the bill does not pass, they will consider our situation slightly differently next time CIR or another immigration bill is introduced in the congress. I think IV ought to present our case in all different angles possible rather than the one way approach of expecting mercy in our situation. Most importantly, I think the premise of the proposed Kerry/Lugar bill is very much applicable the folks in IV. Aren’t many people in this forum waiting for an opportunity to do some business on their own? That is how new immigrants in America have always been. We shouldn’t be any different. I am sure we cannot bring in the capital that senators are looking for. But why don’t they view us slightly differently?
If it is a great opportunity, why dont everyone work on it. Start with investing in IV and taking part in it. IV is you and me.
75% of us in this forum do not qualify for the legislation being proposed here!
You are saying we folks cannot even invest 100K into business?
Even if I agree with you for a second. According to you out of 50 thousand IV members 10 thousand members qualify for this legislation. 10 thousand is a very big number.
Where are these ten thousand members? Even if these 10 thousand members invest $25 per month to lobby this bill it will be 250K per month to lobby. This is a huge amount and they can lobby this bill easily. The problem I see in IV is that out of 50 thousand people only 50 people have $25 per month to invest to lobby their own issues. Rest everyone is just sitting here and only contributing opinions.
If it is a great opportunity, why dont everyone work on it. Start with investing in IV and taking part in it. IV is you and me.
75% of us in this forum do not qualify for the legislation being proposed here!
You are saying we folks cannot even invest 100K into business?
Even if I agree with you for a second. According to you out of 50 thousand IV members 10 thousand members qualify for this legislation. 10 thousand is a very big number.
Where are these ten thousand members? Even if these 10 thousand members invest $25 per month to lobby this bill it will be 250K per month to lobby. This is a huge amount and they can lobby this bill easily. The problem I see in IV is that out of 50 thousand people only 50 people have $25 per month to invest to lobby their own issues. Rest everyone is just sitting here and only contributing opinions.
dresses Luna - Anime, Beateful, Luna,
scorpion00
10-06 02:43 PM
Hi Manish,
I hope everything goes well with you.
Did the officials call you or come to see you in person?
I hope everything goes well with you.
Did the officials call you or come to see you in person?
more...
makeup Harry and Luna Wallpaper
Kodi
07-22 09:56 AM
I thought USCIS won't issue EAD without FP. Its not true?
girlfriend Picnic Amatsuki Wallpaper
guygeek007
07-23 09:25 AM
InspectorFox, Jayant and Tina - Your prompt replies and advice are much appreciated.
hairstyles Sandaime Gintama Wallpaper
Jim77
10-15 12:31 PM
You can buy a confirmed ticket to India, take an Infopass appointment, and tell the Immigration Officer of your urgency to travel to India. Give him a copy of the ticket, a copy of your AP LIN/SRC and he/she should be able to get it expedited for you hopefully. This is my experience, plus I feel you have enough time until January.
bhayzone
04-02 06:45 PM
Hi,
My wife is on an H4 and we're planning to change her status to F1.
Now my H1, thus her H4 is up for renewal soon (I have another 3 yrs on my H1).
I will very soon be transferring my H1 to a new company.
I am worried about the implications this might have on the H4 to F1 transfer.
1] When my new company transfers the H1, will they also file for renewal? Or will they only transfer and later renew seperately.
2] Assuming that we change the current H4 to F1, then will we have to renew the F1 too when my wife's H4 is transferred (due to my H1 transfer).
3] Is it better to transfer to F1 from the current H4 , or wait for the new H4 for the transfer.
All advice/suggestion would be really appreciated.
My wife is on an H4 and we're planning to change her status to F1.
Now my H1, thus her H4 is up for renewal soon (I have another 3 yrs on my H1).
I will very soon be transferring my H1 to a new company.
I am worried about the implications this might have on the H4 to F1 transfer.
1] When my new company transfers the H1, will they also file for renewal? Or will they only transfer and later renew seperately.
2] Assuming that we change the current H4 to F1, then will we have to renew the F1 too when my wife's H4 is transferred (due to my H1 transfer).
3] Is it better to transfer to F1 from the current H4 , or wait for the new H4 for the transfer.
All advice/suggestion would be really appreciated.
go_gc_way
05-13 10:25 AM
That's really an idea , need a thought by all... pros and cons.
Specially a forum like IV, and then I believe it will be another effort to get it there.
Given retrogression has some what a known issue, does any one think ... this will be mentioned any way in the address.
Specially a forum like IV, and then I believe it will be another effort to get it there.
Given retrogression has some what a known issue, does any one think ... this will be mentioned any way in the address.
No comments:
Post a Comment